Sena Norton, July 14, 2004

NOAA Teacher at Sea
Sena Norton
Onboard NOAA Ship Rainier

July 6 – 15, 2004

Mission: Hydrographic Survey
Geographical Area:
Eastern Aleutian Islands, Alaska
July 14, 2004

Location: At anchor, Popof Strait, Shumagin Islands, AK
Latitude: 55 deg 17.24’ N
Longitude: 160 deg 32.17’ N
Visibility: 6 nm
Direction: 060
Wind Speed: 6 kts
Sea wave height: 1 ft
Swell wave height: n/a
Seawater temperature: 10.0 deg C
Sea level pressure: 1009.3 mb
Cloud Cover: 8/8
Weather: Temp: 12.2 deg C, showers, some fog in higher elevations

Plan of Day:
Five launches out for shoreline, multi-beam and visitors tour. I was on RA 1 for shoreline verification and LIDAR disproval.

Science and Technology Log

RA 1 is a jet boat, which means it can get into shallow waters to take readings and not worry about ripping a prop or high centering…both are not good ideas! I was out with Megan Palmer, Brie Welton, KC Longly and the other TAS Leyf Peirce. It was a cozy ride. There were a handful of targets that we set out to visually verify. The nice addition to this launch was that the computer had the updated LIDAR data from a fly over a few days earlier to use, so the launch did not have to take its own shoreline readings, cutting down on the time needed for the mission goals. There was one islet that was misplaced on the chart and so we had to take a picture of where it really was and then disprove its old location by taking depth readings and marking the bearing. This way the rock feature can be moved when the charts are updated.

There was also a shoal that was mis-assigned as to its depth. The LIDAR computers got a reading but were unsure and wanted field verification. We drove a star pattern over the shoal and logged readings, marked the area and took visual cues. Palmer will then work with the sheet and update from our field verifications and re-work the depths.

I was able to help run the logging computer. I marked the targets on the cue from the coxswain and then filled in the bearing, notes and depth or height of the target with the survey tech. I was also able to take digital pictures of some of the targets that we wanted to disprove or assign different locations.

Personal Log

Shoreline was much faster paced because the coxswain has to look out for kelp, watch his depth meter, and stay on target and read bearings/heading and depths to the survey tech. The launch itself is much more maneuverable because of the jet and has more room on deck to move around. Both of the TAS’s were on board this launch today so we were able to talk a little more about our plans for using the science we have learned and linking our classrooms in the future for some investigations.

We are pulling up the anchor and steaming for Kodiak this evening after dinner to arrive early on Friday morning. I am going to miss the crew on aboard. I feel that I have been here long enough to begin really getting to know people and they have added me into their daily schedules and have been patient with my questions or my getting in the way. I feel very safe and know that there are people who are looking out for me. I hope to keep in contact with some of the people on-board and maybe have them become part of my classroom as a resident scientist for the kids to interact with over the course of a season. The possibilities are endless.

Question of the Day:

Can the cartographers change locations of rocks when they make the final charts?

It all depends on the scale of the chart. If the chart is a small scale the cartographer might not worry about the exact location of rocks and might add in that there is a “rocky area”. If the chart is more specific to this area, the exact locations of rocks, shoals and other hazards are important.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s